Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
Determination of the dry residue (ash content) of a filtered or unfiltered water sample.
Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
A specified quantity of water is evaporated, and any remaining moisture is subsequently eliminated in a drying oven. The dry residue is then weighed.
This method describes how to determine the total nitrogen in malt.
Malt intended for use in beer brewing or elsewhere in the food industry.
Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
For determination of the dry residue in water after filtration, a certain quantity of filtrate is evaporated until dry. It is subsequently dried in a drying oven to eliminate any remaining moisture.
The method describes how to calculate the total exposure of individuals to radionuclides in drinking water.
Drinking water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
Wastewater generated in the industrial production of beer and food
Well-mixed wastewater is poured into an Imhoff funnel, and the volume of sludge is recorded using the volumetric scale on the graduated cylinder after a settling time of two hours.
After decanting the supernatant, the deposits are quantitatively transferred to a platinum dish in which, after drying at 105 °C, the dry residue after evaporation is determined by weight.
After annealing in a muffle furnace at 550 °C for 30 min, the ash content is determined gravimetrically.
The annealing losses are calculated from the difference in weight between the dry residue after evaporation and the ash content.