Boiler water for use in the production of beer and other foods
Hydrazine and p-dimethylaminobenzaldehyde in an aqueous solution containing alcohol form a compound which is yellowish red in color.
Determination of the total oxygen content (dissolved and in the headspace) in filled containers
The bottled or canned beer is brought to 20 °C and mechanically shaken, thereby achieving equilibrium between the oxygen dissolved in the beer and the oxygen present in the headspace (Henry’s and Dalton’s laws). By directly measuring either the oxygen in the beer or in the headspace, the total oxygen can be calculated through referencing a table of values, which includes the headspace volume as a percentage of the fill volume.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The volatile constituents in hops or hop products are obtained by means of steam distillation. The hydrocarbon and oxygen fractions are separated using a process involving column chromatography.
Determination of dissolved oxygen concentration by electrochemical oxygen sensors with exposed electrodes
The measurement process using a Digox Analyzer works according to the principle of the potentiostatic three-electrode measurement system developed by TÖDT and TESKE and does not require a membrane.
The measuring electrode consists of solid silver, while the counter electrode is made of stainless steel. The reference electrode is composed of silver/silver chloride.
After generating a defined “polarization voltage”, an electrochemical reaction occurs at the measuring electrode, inducing a reduction of the oxygen molecules in the sample.
Measuring electrode (silver):
O2 + 2 H2O + 4 e− → 4 OH− (cathodic process)
Counter electrode (stainless steel):
4 OH− → O2 + 2 H2O + 4 e− (anodic process)
The flow of current as a result of this reaction is directly proportional to the amount of dissolved oxygen in the sample, if the polarization voltage is fixed as close to the level of the diffusion threshold current as possible.
In this case, the relationship can be represented as follows:
I = K × CO2, whereupon K = n × F × A × 1/d
I = sensor current
CO2 = oxygen concentration
F = Faraday constant
n = number of electrons per molecule
A = cathode surface
d = thickness of the “undisturbed layer” along the wall
The thickness of the undisturbed layer along the wall is determined by the hydrodynamic relationships at the measurement electrode and the transportation of oxygen molecules across the boundary layer brought about by temperature-dependent diffusion processes. Both of these clearly defined factors are precisely measured and compensated.
In order to adjust the polarization voltage between the two electrodes, a third electrode, the reference electrode, is employed in Digox measurement devices. This reference electrode remains in contact with the surface of the measuring electrode over a diaphragm in order to prevent mass transfer [1, 2, 3].
Active calibration:
In-line calibration is integrated into the device and is initiated by pressing a button. Taking advantage of Faraday’s Law, an exactly defined amount of oxygen is produced through the electrolysis of water.
I × t = m × F
I = current required for electrolysis
t = time
m = mass, g/mol
F = Faraday constant
The oxygen dissolves in the medium as it flows through and is detected at the measuring cell. The hydrogen liberated during the electrolysis reaction is not relevant for the measurement. The microprocessor monitors the calibration values and carries out any necessary corrective measures. The electrolysis enables the calibration of the device to be carried out under the same conditions and in the same medium as the analysis. Measurement operations are not disrupted during the calibration process [3].
The following applies to Digox 6.1 and all later models: In order to precisely determine the necessary potential for the measurement system, the Digox Analyzer possesses a scanner, which records the product-specific behavior of the medium subject to analysis. This can establish, whether the medium – due to the additives or supplements – must be measured at another potential. In this way, all types of beer-based beverages, non-alcoholic beverages and wine can be analyzed. Moreover, oxygen-reducing substances which can cause the calibration to be inaccurate may also be detected using the calibration scanning process. The device automatically implements the necessary compensative measures with the factors it has determined.
Suitable for analysis of all (laboratory) wort samples
Copper in wort is measured using AAS by directly aspirating the diluted sample into an air-acetylene flame or by electrothermal atomization; the measurement is made at 324.7 nm.
Determination of the "air volume" (gas volume other than carbon dioxide) and oxygen in the headspace of cylinders and cans
Suitable for determination in beer, mixed beer beverages and carbonated beverages
The burette containing the caustic solution, in this case, is equipped with a short capillary outlet. A tube is attached to this outlet, connecting the burette to a second burette with a lower capillary outlet. The second burette contains an alkaline solution of sodium dithionite, which binds oxygen [1, 2]. In the first burette, the volume of air is measured, and in the second, the volume of nitrogen.