All alkaline or acidic cleaning solutions.
The main components of alkaline and acidic detergent solutions are strong electrolytes with a high degree of dissociation. If an electric field is applied in an aqueous system, the ions take over the current transport. This depends, among other things, on the concentration of the electrolyte. By measuring a defined value - the so-called specific conductivity - a linear dependency is given in the concentration range commonly used in cleaning practice and the concentration can be easily determined. The specific conductivity is specified in the unit Siemens or millisiemens per centimeter (S/cm; mS/cm).
Determination of the concentration of active ingredients in alkaline cleaners.
All alkaline cleaning solutions.
Alkaline cleaning solutions, especially for automatic bottle cleaning, consist of sodium hydroxide and so-called active ingredient concentrates. Concentration losses caused by carryover or carbonization can be determined by determining the alkaline component in accordance with
T-740.01.041 Electrolytic conductivity of acidic and alkaline cleaning agents
T-741.02.032 Alkaline cleaning agents - sodium hydroxide only
T-741.03.032 Alkaline cleaning agents containing carbonate - sodium hydroxide and soda
T-741.04.023 Alkaline cleaning agents containing carbonate in the presence of phosphates and soiling - sodium hydroxide and soda
T-741.05.032 Alkaline cleaning agents containing aluminum - sodium hydroxide, aluminum
T-741.06.032 Alkaline cleaning agents containing aluminum - sodium hydroxide, aluminum, soda
can be controlled. However, the active ingredient concentrates are only recorded if it is ensured that the required concentration of the desired active ingredient has been added or dosed using appropriate dosing equipment (proportional dosing). If this is not the case, i.e. if the active ingredient concentrates are prepared and dosed manually, a separate check of the active ingredient concentration is advisable. The determination methods are very different and are specific to a particular active ingredient concentrate*. The method should be requested from the manufacturer.
* e.g. P 3-stabilon; Henkel Hygiene GmbH, D-40554 Düsseldorf, https://www.henkel.de/