Determination of the concentration of active ingredients in alkaline cleaners.
All alkaline cleaning solutions.
Alkaline cleaning solutions, especially for automatic bottle cleaning, consist of sodium hydroxide and so-called active ingredient concentrates. Concentration losses caused by carryover or carbonization can be determined by determining the alkaline component in accordance with
T-740.01.041 Electrolytic conductivity of acidic and alkaline cleaning agents
T-741.02.032 Alkaline cleaning agents - quicklime (CaO) or sodium hydroxide without soda
T-741.03.032 Alkaline cleaning agents containing carbonate - sodium hydroxide and soda
T-741.04.032 Alkaline cleaning agents containing carbonate in the presence of phosphates and soiling - sodium hydroxide and soda
T-741.05.032 Alkaline cleaning agents containing aluminum - sodium hydroxide, aluminum
T-741.06.032 Alkaline cleaning agents containing aluminum - sodium hydroxide, aluminum, soda
can be controlled. However, the active ingredient concentrates are only recorded if it is ensured that the required concentration of the desired active ingredient has been added or dosed using appropriate dosing equipment (proportional dosing). If this is not the case, i.e. if the active ingredient concentrates are prepared and dosed manually, a separate check of the active ingredient concentration is advisable. The determination methods are very different and are specific to a particular active ingredient concentrate*. The method should be requested from the manufacturer.
* e.g. P 3-stabilon; Henkel Hygiene GmbH, D-40554 Düsseldorf, https://www.henkel.de/