Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
A specified quantity of water is evaporated, and any remaining moisture is subsequently eliminated in a drying oven. The dry residue is then weighed.
The method provides an estimate of the portion of pre-germinated barley grains at the time of harvest or prior to storage in silos.
Barley intended for the production of malt is evaluated with regard to pre-germination.
The onset of germination is accompanied by the synthesis of enzymes, which can be made visible using fluorescein dibutyrate (FDB). The reagent fluoresces in the presence of lipases.
In order to make the enzyme activity visible, the kernels are first split in half and coated with the FDB reagent after which they are examined in a suitable measuring device under UV light. An intense yellow fluorescence can be seen in the parts of the kernels where enzyme activity is present.
The nitrogen/raw protein content of barley intended for the production of brewing malt must be determined in advance.
The sample is combusted in a pure oxygen atmosphere at approx. 1000 °C. The resulting mix of gases comes into contact with a CuO/Pt catalyst and is thereby completely oxidized and subsequently freed of all by-products which could potentially interfere with analysis.
After the nitrogen oxides formed in the combustion process are reduced upon contact with tungsten, all nitrogen compounds in the sample are reduced to elemental nitrogen (N2). The elemental nitrogen is then detected by means of a thermal conductivity detector (TCD), the signal of which is quantitatively evaluated by a dedicated integrator.
This method describes how to determine the total nitrogen content by means of the combustion method according to Dumas.
Malt intended for use in beer brewing or elsewhere in the food industry.
This method describes how to determine the extract content of malt used to produce laboratory wort.
Malt intended for use in beer brewing or elsewhere in the food industry
The extract content of malt refers to the compounds from finely ground malt (fine grind), which are brought into solution during a standardized mashing process.
The extract content is determined by the weight ratio sL 20/20 of the wort on the basis of the official sugar tables (Plato tables) at 20 °C. sL 20/20 stands for the weight ratio of a volume of wort at 20 °C to the same volume of water at the same temperature.
Suitable for all (laboratory) worts
Wort is produced using a laboratory mash method (fine grind) after which the nitrogen content of the wort is determined.