This method describes how to determine the capacity for water imbibition (moisture uptake) in barley.
Barley intended for the production of malt is evaluated on the basis of its capacity for water imbibition.
Barley is steeped according to a defined scheme, and the absorption of the steeping liquor by the kernels at defined times is determined by calculating the moisture content. The moisture content after 72 h steeping time is used to assess the absorption of steeping liquor or the capacity for water imbibition in barley.
Potassium permanganate oxidizes many organic and certain inorganic substances more or less completely in acidic, neutral or alkaline solutions. The volume of potassium permanganate required in the analysis is determined potentiometrically. Since oxidation depends on the type of solution, on its temperature and on the reaction time, the procedure described below must be followed precisely.
In acidic solutions, permanganate ions are typically reduced to manganese(II) ions:
MnO4- + 5 e- + 8 H3O+ → Mn2+ + 12 H2O
In alkaline solutions, the reduction results in tetravalent manganese only:
MnO4- + 3 e- + 4 H3O+ → MnO2 + 6 H2O
Since in both cases the titration takes place in an acidic solution, this is irrelevant for the calculation. By adding oxalic acid, both the excess permanganate ions as well as the tetravalent manganese are reduced to manganese(II) ions:
2 MnO4- + 5 C2O42- + 16 H3O+ → 2 Mn2+ + 24 H2O + 10 CO2
MnO2 + C2O42- + 4 H3O+ → Mn2+ + 6 H2O + 2 CO2
Whole hops intended for use in beer brewing or elsewhere in the food industry
Evaluation of the appearance of hop cones is performed through visual inspection and sensory assessment.
Determination of formic acid by enzymatic means
This analysis is suitable for wort, beer, beer-based beverages and NAB.
Formic acid can be found in beer in small quantities, and it is also formed by contaminating bacteria, for example, by lactic acid bacteria (rods).
In the presence of the enzyme formate dehydrogenase (FDH), the formic acid created in this reaction is quantitatively oxidized to bicarbonate by nicotinamide adenine dinucleotide (NAD):
HCOO- + NAD+ + H2O \(^{\underrightarrow{FDH}}\) HCO3- + NADH + H+
The amount of NADH formed during the reaction is equivalent to the amount of formic acid and can be determined photometrically based on its absorbance at 334, 340 or 365 nm.
Oxalic acid (oxalate) is transformed into formic acid and CO2 in this reaction catalyzed by the enzyme oxalate decarboxylase (Ox-DC):
Oxalic acid \(^{\underrightarrow{Ox-DC}}\) formic acid + CO2
The quantity of NADH produced during the reaction is equivalent to the amount of formic acid and is determined photometrically owing to its absorption at 334, 340 or 365 nm. In preparation for this test, the free formic acid present in the solution is determined along with the oxalic acid. Each are accounted for in the blank.
Whole hops intended for use in beer brewing or elsewhere in the food industry
Evaluation of the appearance of hop cones is performed through visual and manual inspection.
This method describes how to conduct a simple descriptive test.
beer, beer-based beverages, non-alcoholic beverages, mineral water
This simple descriptive analysis provides a method for articulately communicating sensory attributes. The method can be utilized to formulate a list of attributes for the profile test. The list of attributes must then be statistically corroborated and reference samples employed to ensure that all of the testers identify the same reference substance for each of the given attributes (e.g., rancid butter, sweaty = reference substance butyric acid).