Determination of the vicinal diketone content (diacetyl + 2,3-pentanedione) as well as the total diketone content in beer
The method is suitable for filtered beers brewed to any original wort or to any alcohol content as well as for fermenting wort.
Diacetyl (2,3-butanedione) and 2,3-pentanedione are detected photometrically in the beer after steam distillation. It is also possible to determine precursors in green beer.
The method is suitable for the determination of water vapor volatile aroma compounds in beer.
Volatile aroma compounds are driven out of the sample through steam distillation. The ethanolic distillate is saturated with NaCl. Potassium hydrogen sulfite is added to separate carbonyl groups that might interfere with the analysis. The extraction of the aroma compounds is performed by shaking out with dichloromethane and the phases separated by centrifuging.
Whole hops intended for use in beer brewing or elsewhere in the food industry
Evaluation of the appearance of hop cones is performed through visual inspection and sensory assessment.
Determination of xanthohumol and isoxanthohumol
All beers, beer-based beverages, wort, ethanol extracts, CO2 spent hops and xanthohumol products
Xanthohumol and isoxanthohumol are dissolved with acetonitrile from the sample and following separation, are determined using a Nucleodur C18 column and UV detection.
Applicable for all (laboratory) worts
The Congress wort is heated in order to inactivate the amylolytic enzymes, and afterwards, yeast is added and the wort is allowed to completely ferment out at a minimum temperature of 20 °C in a fermentation tube (fig. 1). The difference in the extract before and after fermentation is measured in order to calculate the limit of attenuation.
Barley intended for the production of malt is to be evaluated on the basis of the characteristics described below.
visual assessment