Hops and hop products intended for use in beer brewing or elsewhere in the food industry
After extraction with toluene, the α-acids and β-acids in the hops and hop pellets are determined using spectrophotometry.
This method describes the determination of four hop aroma compounds found in hops and hop products using gas chromatography.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The hop oil obtained through steam distillation (refer to links) is dissolved in an organic solvent, separated into its components by means of gas chromatography and determined with a flame ionization detector. The contents are expressed as a percentage of the area of each component compared to the overall area of the peak.
Hops with high moisture content have a shorter storage life; in contrast, hops that are too dry disintegrate easily and lose their lupulin.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The moisture content of whole hops, hop powder products or pellets is determined through the difference in weight before and after drying under standardized conditions.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
Hop constituents are distributed between an aqueous acidic methanolic phase and diethyl ether. Hop bitter substances extracted with ether are subsequently separated according to their different solubility properties in cold methanol and hexane into fractions: total resins, soft resins and hard resins. The soft resins are further separated according to their capacity to form complexes with lead salts into α-acids (conductometer value) and a β-fraction.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
After milling, hops and hop powder products are extracted using a diethyl ether/methanol mixture and a hydrochloric acid solution. The α-acids and β-acids dissolved in the ether phase are separated using reversed phase high-pressure liquid chromatography (RP-HPLC) and measured spectrophotometrically at a wavelength of 314 nm.
Hop extracts are dissolved in methanol. The α-acids and β-acids dissolved in the methanol are separated using reversed phase high pressure liquid chromatography (RP-HPLC) and measured spectrophotometrically at a wavelength of 314 nm.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The volatile constituents in hops or hop products are obtained by means of steam distillation. The hydrocarbon and oxygen fractions are separated using a process involving column chromatography.