Hops and hop products intended for use in beer brewing or elsewhere in the food industry
After milling, hops and hop powder products are extracted using a diethyl ether/methanol mixture and a hydrochloric acid solution. The α-acids and β-acids dissolved in the ether phase are separated using reversed phase high-pressure liquid chromatography (RP-HPLC) and measured spectrophotometrically at a wavelength of 314 nm.
Hop extracts are dissolved in methanol. The α-acids and β-acids dissolved in the methanol are separated using reversed phase high pressure liquid chromatography (RP-HPLC) and measured spectrophotometrically at a wavelength of 314 nm.
This method describes how to determine the α-acids and β-acids in hop extract using high-pressure liquid chromatography.
Hop extract intended for use in beer brewing or elsewhere in the food industry
The method describes how to determine the iso-α-acids, α-acids and β-acids in hop extracts and isomerized extracts by means of high-pressure liquid chromatography.
Hop extract and isomerized hop extract intended for use in beer brewing or elsewhere in the food industry
Hop extracts and isomerized hop extracts are dissolved in methanol. The iso-α-acids, α-acids and β-acids are separated using hig-pressure liquid chromatography (HPLC) with gradient elution and measured spectrophotometrically at a wavelength of 270 nm (iso-α-acids) and 314 nm (α-acids and β-acids).
This method describes the spectrophotometric determination of the color of roasted malt beer/extract.
Roasted malt beer/extract intended for use in beer brewing or elsewhere in the food industry.
Drinking water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
Vinyl chloride is determined using gas chromatography with detection by means of mass spectrometry (GC-MS) through application of the static headspace technique (HS). This method detects selected volatile organic compounds including chloroethene (vinyl chloride).
Determination of the amount of cold break material in the pitching wort
Cast-out wort, wort from the midpoint of chilling/pitching wort (without yeast)
The hot break material (trub) and any hop particles which may be present in the wort, must first be removed. After the wort has been cooled to 2 °C, it is filtered through a glass fiber filter. The residue remaining on the filter is dried and then weighed.
Cold break material or cold trub refers to all material that settles out in the process of chilling wort after separation of the hot trub or hot break material. Cold trub can be filtered out of the wort and primarily consists of proteins (48–57 %), tannins (11–26 %) and carbohydrates (20–36 %). The amount of cold break material in wort depends on the quality and composition of the raw materials, brewhouse equipment and wort handling. In academic and professional circles, opinions regarding the significance of cold break material for downstream processes and for the quality of the finished beer are strongly divided [1, 2, 5]. Under certain circumstances, the quantity of cold break material in wort may exceed 250 mg/l, especially where accelerated fermentation is practiced. Ultimately, this can detract from the flavor of the finished beer [3]. Breweries, where removal of the cold break material has been practiced successfully, determine the quantity of cold break in their pitching wort at regular intervals, in order to evaluate the efficacy of their separation equipment.