Malt intended for use in beer brewing or elsewhere in the food industry
After boiling for two hours on a reflux condenser, the wort is clarified using membrane filtration. The color is measured with a spectrophotometer.
Boiler water for use in the production of beer and other foods
Analogous to the p and m values obtained in the determination of acid capacity (pH 8.2 and 4.3), this analysis is performed according to W-000.13.031 Acid Consumption (Alkalinity, p-Value and m-Value)/Acid Capacity to pH of 8.2 and/or 4.3 for Water. The alkaline capacity of the boiler water is determined through titration of the sample with 0.1 N sodium hydroxide (instead of hydrochloric acid) to a pH of 4.3 and/or 8.2.
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The volatile constituents in hops or hop products are obtained by means of steam distillation. The hydrocarbon and oxygen fractions are separated using a process involving column chromatography.
Water intended for use as an ingredient in the production of beer (brewing liquor) or other foods
Oils and fats dispersed in water are precipitated using aluminum sulfate. After dissolving the precipitate with hydrochloric acid in organic solvents, they can be separated from the mineral salts.
This method describes the general requirements for boiler feed water:
Boiler feed water for use in the production of beer and other foods
The requirements for boiler feed water are detailed in the analysis methods listed below.
Barley intended for the production of malt is evaluated with regard to pre-germination.
Kernels suspected of having pre-germinated are boiled in water and then allowed to remain in cold water for some time. Thereby, the husks become transparent, making the embryo and the acrospire, if present, visible.