Determination of the proportional composition of grist fractions through sieve analysis
Malt grist, grist from adjuncts
The extract yield in the brewhouse is highly dependent on optimal milling of the malt or other grain. The composition of the brewery grist should therefore be monitored on a regular basis.
The sieve analysis is performed on a sample of brewery grist of a known weight with a shaking device containing a set of sieves (according to DIN ISO 3310-1 specifications or a Pfungstädter plansifter sieving device).
Volumetric determination of the husk fraction
Grist from malt or adjuncts
The sieve analysis is performed on a sample of brewery grist of a known weight with a shaking device containing a set of sieves (according to DIN ISO 3310-1 specifications or a Pfungstädter plansifter sieving device). The material retained on sieve 1 is then poured into a 500 ml graduated cylinder and the volume (without shaking) is read on the graduated cylinder.
This method describes how to mill grain or malt to produce fine or coarse grist.
Malt intended for use in beer brewing or elsewhere in the food industry
Malt is ground between two horizontally positioned, grooved discs. The lower disc is driven by an electric motor and rotates at approx. 1500 rpm; the upper disc is fixed and therefore does not move. During the milling process, the malt migrates from the center of the discs to the outer edge, where the grist falls through an outlet spout into a grist beaker.
The gap between the discs can be adjusted by turning a socket head screw on a calibrated ring bearing scale markings. The scale on the calibrated ring ranges from 0 to 20, with each scale division corresponding to a gap between the discs of 0.10 mm. Each scale division is subdivided into five smaller divisions; each of the smaller marks is equivalent to 0.02 mm. Two gap adjusting rings ensure reproducible mill settings.
The method describes the isothermal production of wort at 65 °C.
Malt intended for use in beer brewing or elsewhere in the food industry
The isothermal mashing process is the principle method for producing laboratory malt extract. The resultant wort is then analyzed for a wide variety of attributes. This mashing regime is often selected as the extraction process for the purposes of more discernably comparing the differences in barley varieties .
This method describes how to collect samples of malt.
Malt intended for use in beer brewing or elsewhere in the food industry.
Collection of representative samples
During sensory evaluation, the cones are rubbed between the hands and the quality of the aroma is distinguished in terms of purity, fineness and intensity.
Whole hops intended for use in beer brewing or elsewhere in the food industry
Evaluation of the aroma of hop cones is performed through visual and manual inspection.
Points to be awarded: 1−30