This method describes the conditions under which sensory analysis is to be performed.
Beer, beer-based beverages, non-alcoholic beverages, mineral water
One of the fundamental prerequisites for a properly structured sensory evaluation of beverages is training members of the tasting panel.
Determination of the amount of cold break material in the pitching wort
Cast-out wort, wort from the midpoint of chilling/pitching wort (without yeast)
The hot break material (trub) and any hop particles which may be present in the wort, must first be removed. After the wort has been cooled to 2 °C, it is filtered through a glass fiber filter. The residue remaining on the filter is dried and then weighed.
Cold break material or cold trub refers to all material that settles out in the process of chilling wort after separation of the hot trub or hot break material. Cold trub can be filtered out of the wort and primarily consists of proteins (48–57 %), tannins (11–26 %) and carbohydrates (20–36 %). The amount of cold break material in wort depends on the quality and composition of the raw materials, brewhouse equipment and wort handling. In academic and professional circles, opinions regarding the significance of cold break material for downstream processes and for the quality of the finished beer are strongly divided [1, 2, 5]. Under certain circumstances, the quantity of cold break material in wort may exceed 250 mg/l, especially where accelerated fermentation is practiced. Ultimately, this can detract from the flavor of the finished beer [3]. Breweries, where removal of the cold break material has been practiced successfully, determine the quantity of cold break in their pitching wort at regular intervals, in order to evaluate the efficacy of their separation equipment.
This method describes how to determine not only the variety of barley but whether a lot of barley consists of a mix of varieties.
Barley intended for malt production as well as barley malt
Separation and identification of the protein (hordein) fraction of barley or barley malt by means of gel electrophoresis. The method is suitable for all types of barley, as long as reference substances are available. However, the method cannot be used to identify barley varieties used to produce malt that has been so strongly modified that the protein fraction is almost completely degraded.
This method describes how to determine the percentage of malt that sinks in water.
Malt intended for use in beer brewing or elsewhere in the food industry
Barley kernels sink in water, while malt kernels normally float due to air pockets. The number of floating kernels increases with greater acrospire development and corresponding degree of advanced malt modification.
This method describes how to determine malted barley varieties and how to detect mixtures of different barley varieties in one lot of malt.
Malt intended for use in beer brewing or elsewhere in the food industry
Barley malt intended for use in beer brewing or elsewhere in the food industry
High-molecular weight dextrins and starch present in the wort extracted from brewery spent grains are precipitated through the addition of ethanol, centrifuged and dissolved in phosphate buffer, followed by the addition of an iodine solution. Depending upon the molecular weight and degree of branching, a red to blue color forms, the intensity of which is measured spectrophotometrically at 578 nm.