The husk content of barley intended for use in beer production should be known.
The husks are separated from the barley kernels through treatment with sodium hypochlorite. The husk content is determined by calculating the reduction in weight, (dry matter) resulting from the removal of the husks.
This method describes how the protein content in adjuncts is determined.
This method describes how the protein content in adjuncts is determined.
This method describes how to evaluate husk character as part of the visual and manual inspection of a lot of barley.
Barley intended for the production of malt is to be evaluated on the basis of the characteristics described below.
Visual assessment
This method describes how to determine the percentage of kernels with damaged husks in a lot of barley as part of visual and manual inspection.
Barley intended for the production of malt; therefore, the kernels are to be evaluated on the basis of the characteristics described below.
Visual assessment
Prior to storage, the moisture content of barley must be determined.
The electrical capacitance of a whole, unground grain sample is measured. The apparatus contains three sensors:
Capacitance
The moisture present in a sample absorbs the electrical energy between the walls of the sample container. The electrical signal or the “capacity” increases with higher moisture contents of the sample and with larger sample sizes.
Oscillating weight balance
The oscillating weight balance measures the frequency to determine the mass.
Temperature correction
The capacitance of the sample rises with the temperature. A Thermistor temperature sensor is built into the sample container. The microprocessor automatically corrects for the moisture content.