Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The volatile constituents in hops or hop products are obtained by means of steam distillation. The hydrocarbon and oxygen fractions are separated using a process involving column chromatography.
Hop extract intended for use in beer brewing or elsewhere in the food industry
Valid for all non-turbid beers
By incrementally adding increasing amounts of a saturated ammonium sulfate solution to beer, haze appears as a result of protein precipitation. The amount of the ammonium sulfate solution necessary to produce haze is directly proportional to the stability of the beer. The ammonium sulfate precipitation value expresses the ml of saturated ammonium sulfate solution that must be added to 100 ml of beer in order to produce a barely perceptible opalescence.
The husk content of barley intended for use in beer production should be known.
The husks are separated from the barley kernels through treatment with sodium hypochlorite. The husk content is determined by calculating the reduction in weight, (dry matter) resulting from the removal of the husks.
This method describes how to determine the hard resin fraction in hops and hop products; for the procedure, refer to the MEBAK method R-300.03.901 [2016-03].
Hops and hop products intended for use in beer brewing or elsewhere in the food industry
The hard resins are calculated by subtracting the soft resins from the total resins. This yields the hard resin content as a percentage of the total resins.
Applicable for all (laboratory) worts
Medium and high molecular weight proteins are precipitated by phosphomolybdic acid. The nitrogen is determined in the filtrate. Therefore, the results express the amount of low molecular weight proteins.